How to Setup - PRINTER

This Page shows how configure a Zebra Printer device and configure the Firefox browser in a PC with Windows

Printer Setup

In the device settings, the Zebra printer must be selected

For the stations we always recommend to use Windows devices for better operations of the modules and the printers.

ZEBRA Old Models Setup

The following instructions is in PRINTER MANAGER for WINDOWS.

• Open Printer Manager

• Select the Zebra and mark as DEFAULT PRINTER

• Right click and select Print Configuration

• In the Options Tab, change the Width and Heigth according to your label measurements

• Change the Paper Format to centimeters

• In Advance Setup Tab, define if your printer works in Thermal Direct or Thermal Transfer

• In STOCKs Tab, select a new Format

• Give a Name to the new format, and save. It takes the information of the setup already entered

ZEBRA NEW Models Setup

• Open Printer Manager

• Select the Zebra and mark as DEFAULT PRINTER

• Right click and select Print Configuration

• In the PAGE Tab, change the Width and Heigth according to your label measurements

• In PRINT OPTIONS tab, define if your printer works in Thermal Direct or Thermal Transfer

• In UNIT tab, change to centimeters

FIREFOX is required for Station 2 and Station 3. The user must be use only that browser for PRINT any label

Firefox Setup

Lastets version of FIREFOX don't enable by default have the CONFIGURAR PAGINA menu option

To enable this option:

• Open a new tab

• Type: about: config, and then enter

• Accept the Risk and Continue

• Type: print.show_page_setup_menu

• Double click to change to TRUE

• Go back and Click in FILE, then select PAGE SETUP

• Select Margenes y Encabezado, Pie de pagina

• Change the margins to:

• Superior: 0.1

• Izquierda: 0.0

• Derecha: 0.0

• Inferior: 0.1

• In Encabezados y Pies de Pagina, change all the options to BLANK

• Then click on ACEPTAR

If that configuration doesn't work, please leave all the margins in 0.0

After finishing the configuration, we must go to station 2 and press Control + P on the keyboard of our computer to save the configurations in the browser and to set as default the printer.

We are going to see a popup tab, in which we must select the Zebra printer.

This is done so that the browser takes the printer settings by default.

Please hit "print" and the configuration will be saved in the browser.

Silent Printing Setup

Silent / Background Printing - Firefox - ShopTill-e.comshoptille